Week 1 Complete: My Long-Awaited Lap Belt Backpack is Finally Finished

Two short weeks ago I challenged myself to complete one project a week for the next seven weeks.  I’ll be honest, I already kind of failed, but I figure if I have seven projects done at the end I’ll be proud of myself.  I made the rules after all right?

I say “kind of” failed, because my week one project took about one and a half weeks as it was a bit more complex than I had planned for.  If you’ve seen my Instagram, you know that a few weeks ago the two lap belts I ordered finally arrived and I was excited to get them onto a project.

I decided to kill two birds with one stone and make my week 1 project completing the lap belt backpack I decided to use the blue buckle on.  This was a fun and challenging project, because I had no pattern I was using for the project, just a collection of pictures from Pinterest I wanted to combine and make my own. Usually, I would take these pictures and make a detailed sketch of what I wanted my result to look like…

This time around I must have fell and bumped my head, because I never competed a full sketch of the project!  Instead I just started from what I knew how to make and strove to make it look as much like my main inspiration picture as possible.  It either says something about my reverse engineering skills or my sheer luck that the backpack tuned out as well as it did, but that’s a discussion for later.

uber cool bags made from recycled car seats and seat belts from rePack (on FB).

My main project inspiration

Looking at flap backpacks on Pinterest I figured that a flap backpack or drawstring backpack are in general nothing more than a tote bag with flaps and/or drawstrings added.  Luckily, I have making square bottom tote bags down to a science.  All I had to do was measure another backpack I had that I liked the size of and add some extra L X W for the seam allowance.

I decided I wanted the bottom of the bag cut on a fold so that the base would all be one piece and the sides would need to be stitched up.  Next, I added the accent leather (pleather?) fabric on top of the main upholstery weight leopard print fabric.  I debated putting an outside pocket on the back of the backpack, but in the end decided to leave that for the bags next improved iteration.

Embarrassingly, I accidentally stitched all the accent fabric on before adding the bottom half of the lap belt and had to remove some of the stitching, so I could slip in the lap belt.  It was no big deal but felt like a rookie mistake.

It was at this point that I took a break to think out the design more before I made a mistake that would be hard to fix.  Since I didn’t have a detailed sketch I spent a lot of time mentally working out the different options for reaching my end result.  I asked myself questions like: When should I add the flap, should the top half of the buckle go on top or underneath the flap, how do I keep the heavyweight Pellon interfacing in place at the base of the bag?Although these were important questions to ask myself, I think they were also mixed in with a good amount of procrastination.  In the end, I inserted the bag lining with an added pocket (see the cute bee print fabric) and then added the flap.  I decided on splitting the top portion of the buckle into two pieces.  I left the adjustable strap out and the part attached to the buckle was sewn onto the end of the flap.  I also used some of the leftover belt to make a grab handle on the top of the backpack.

The most stressful part of making any bag is always inserting the lining for me.  I’ve tried all the methods, but somehow, I always seem to misjudge the lining and must adjust. *Facepalm* The thickness of all the layers is also a stressor for me and with this bag it was especially stressful.  With my upholstery weight fabric, lining fabric, two-layered flap and two-layers of belt buckle I had my machine put to the test!

Ruby did remarkably well given all I (literally) put her through.  Honestly, all the needles I broke on this project are entirely on me.  I learned a whole lot about the right mix of speed, needle type and stitch length making this backpack.

Anyways, sorry there aren’t more pictures of the process!  I’ll do better next time.  I think with my lack of planning and extemporaneous sewing (is that a real phrase?) I was afraid the process would be especially ugly; I wasn’t wrong, but I’m sure now that would have only made it that much better to share with my readers.  Embrace the process and all that.

In the end, I ended up with a beautiful, heavier than standard backpack, that’s great for carrying the essentials and a light laptop or tablet.  Let me know what you think in the comments.  I’m already preparing a list of what I’d do better for next time.  See you in a bit, when I reveal how Week 2’s project went.

This slideshow requires JavaScript.

Stay sweet, Sweeties!

Move Binder

My First Move Went Poorly – Your Next Move Doesn’t Have To

You might be wondering why I haven’t posted in a while.  Well, I’m moving!  Isn’t that exciting?!?  Yes, it is, but moving is also stressful.  My last move was a nightmare.  I left myself with too much stuff and too little time.  It was in those moments of pure stress and fighting the clock that I promised myself never again.  Never again!

However, I bet you’re wondering, “How exactly should I prepare for a move?”   Don’t worry I’m here for you.  I struggled so you didn’t have to.  I’ve spent the past months leading up to my move scouring the internet for moving do’s and don’ts to make the ultimate moving templates and an informational Pinterest board!

Click HERE to view and print my Move Binder pdf and click HERE for a Moving Pro Con List Excel file.  I love the Excel file, because it’s great for any big decision you need to make.  The link to the Pinterest board is below plus there’s a sneak peak of what’s inside the Move Binder Template.  Enjoy!

See you in a few weeks, Sweeties.  Moving day is this Friday, so I might be out of pocket for a while.  However, be sure to let me know what you think of my moving templates in the comments!  Stay sweet, Sweeties!

I Made Travel Themed Luggage Tags!

Look at me go! Almost a month in and I am absolutely loving my Designer Ruby Royale Sewing/Embroidery machine. It was made with the sewist at heart and it showed on my latest project! Be on the lookout for a comprehensive video and blog review of the machine soon.

Anyways, my machine is awesome and I’ve been feeling inspired to try new things! I’ve always wanted to do an in hoop design, all or most of what you are making is created in the hoop, I just never got around to it. It just still seemed too complicated. Boy was I wrong. In the hoop embroidery is the stuff!

I decided to make travel themed luggage tags, because they’re the perfect gift for my friend who’s retiring and vacationing in Paris. Not to mention they go hand and hand with the big launch I have been working towards for my Etsy shop.

I downloaded the designs from Embroidery Library’s website. You can download the luggage tags here. They can be purchased separately or in a design pack.

They fit in a 4 by 4 hoop if you leave the design as is. I decided to make mine a little bigger, so a business card would fit. However, don’t fret if you decide to keep them as is; there’s a link they give you to contact card printouts that we’re made for the tags.

I used my Brother Scan and Cut to cut the fabric for the project. Highly recommend! This made the already simple in the hoop project ten times easier. Then I just followed along with the detailed instructions and watched the magic happen. It’s like appliqué on steroids!

For extra depth be sure to go over the final design elements more than once. If you want the appearance of even more depth pick a slightly lighter shade the second run over the design. It really makes the design pop!

The whole design only took about 15-20 minutes to complete when I had all the materials prepped and ready to go. My machine even allowed me to add an eyelet hole right on screen on the design, so I didn’t even have to use any metal hardware. How cool is that?!?

Pictures are below. Let me know what you think. I’m pretty sure once you take a look you’ll have the travel bug. Do not fear! My tags will be here in my Etsy shop. Stay tuned and remember… Not all who wander are lost.